To return to the home screen, press Clear (red button).
Press .;#* (punctuation key).
Type the admin password, then press Enter (green button). The default password is 1234567F.
Press 3 (Setup menu), then press 2 (Communication).

How do I enable or disable the keybeep or backlight on my iCT220/250?

You can set your iCT220/250’s keybeep to the following:

Always on
Always off
On when the terminal receives an invalid entry

You can also set the terminal’s backlight to the following:

Always off
Always on
On when keys are pressed

To enable or disable the keybeep or backlight, complete the following steps:

To return to the home screen, press Clear (red button).

How do I enable a Private Automated Branch Exchange (PABX) on my iCT220/250?

You can configure your iCT220/250 to use Private Automated Branch Exchange (PABX), allowing it to use multiple call lines with a single access number.

To enable a PABX on your iCT220/250, complete the following steps:

To return to the home screen, press Clear (red button).

How do I confirm the network connection on my iCT220/250?

You can confirm the network connection on your iCT220/250 by using it to ping a public IP address.

To confirm the network connection on your iCT220/250, complete the following steps:

To return to the home screen, press Clear (red button).
Press F (Function key).

How do I configure the tip suggestion option on my iCT220/250?

You can enable or disable suggested tips, and you can also define the percentage value of up to three suggested tips.

To configure the tip suggestion option on your iCT220/250, complete the following steps:

To return to the home screen, press Clear (red button).

How can I enable or disable the tip prompt and automatic tipping on my iCT220/250?

You can enable or disable tip prompts, as well as enable or disable automatic tipping.

To enable or disable tip prompts or automatic tipping, complete the following steps:

To return to the home screen, press Clear (red button).
Press .;#* (punctuation key).

How do I remove the clerk prompt from my iCT220/250?

You can configure your iCT220/250 to prompt for clerk ID, or clerk ID and clerk name.

To configure the clerk ID and clerk name settings on your iCT220/250, complete the following steps:

To return to the home screen, press Clear (red button).