More results...

Suggested search terms: geniusvx520ictbank accountfees

Home > configuration

Articles tagged: configuration

How do I configure a dynamic IP address on my Genius Countertop?

Note: If your device isn’t connected to the network, go to How do I set up my Genius Countertop?

Your device is configured to receive a dynamic IP address by default. If you previously configured a static IP address but you now want to configure a dynamic IP address, complete the following steps:

  1. From the home screen, use the keypad to press 000.
… Read More “How do I configure a dynamic IP address on my Genius Countertop?”

How do I set up my Genius V400m?

Note: To help prevent issues with your V400m, we recommend that you do the following:
  • Charge your V400m when you aren’t using it.
  • Keep your V400m within range of the router.
  • Connect your V400m to secure networks.

To set up your V400m, complete the following steps:

  1. Load the printer paper
  2. Turn on your V400m
  3. Connect your V400m to your network
  4. Configure your POS
  5. Test a transaction

Load the printer paper

  1. Open the paper compartment on your device by pulling the latch up, and then pull the compartment door down.
… Read More “How do I set up my Genius V400m?”

How do I set up my Genius Countertop using the communications module?

Important: If you attach your cables directly to the communications module, make sure you keep your multiport cable in a safe place. You may need to use the multiport cable if you have technical problems with your Genius device.

To set up your Genius device, you need to:

Part 1.

… Read More “How do I set up my Genius Countertop using the communications module?”