How do I configure a static IP address on my Genius e285?

Note: Before you begin, connect your Genius e285 to the network you want to configure. To connect your Genius e285 to the network, see How do I set up my Genius e285?

To configure a static IP address on your Genius e285, follow the steps for your connection type:

• Wi-Fi
• Bluetooth

Wi-Fi

1. 1. Use the keypad to press 1, 5, and 9 at the same time.
   2. Tap Com Control.

      

   3. Tap WiFi.
   4. Tap Configuration, and then use the keypad to enter the password. The default password is 200331.
   5. Tap OK.
   6. From the list of networks, select the network you want to configure, and then tap View/Edit.
   7. Tap IP Settings, and then tap IPv4.
   8. Tap DHCP, and then tap No.
   9. Set values for the following fields:
      • IP address
      • Subnet mask
      • Gateway IP address
      • DNS 1
      • (Optional) DNS 2

Apply your settings and return to the home screen

1. Tap twice.
2. Tap Save, and then tap OK.
3. Tap Yes, and then tap OK.
4. Tap twice.
5. Tap Exit, and then tap Yes.
6. Tap Genius.

Bluetooth

1. Use the keypad to press 1, 5, and 9 at the same time.
2. Tap Com Control.



3. Tap More.
4. Tap Configuration, and then use the keypad to enter the password. The default password is 200331.
5. Tap OK.
6. Tap Network Interface.
7. Tap BT_LAN.
8. Tap IPv4.
9. Tap DHCP, and then tap No.
10. Set values for the following fields:
• IP address
• Subnet mask
• Gateway IP address
• DNS 1
• (Optional) DNS 2

Apply your settings and return to the home screen

1. Tap twice.
2. Tap Save, and then tap OK.
3. Tap Yes, and then tap OK.
4. Tap three times.
5. Tap Exit, and then tap Yes.
6. Tap Genius.

Tags: static ip address, set up, network connection, connect to internet, wifi