More results...

Suggested search terms: geniusvx520ictbank accountfees

Home > Payment Devices > Genius > P400 > How do I configure a dynamic IP address on my Genius P400?

How do I configure a dynamic IP address on my Genius P400?

RELATED ARTICLES
How do I check my Genius P400 is ready to use?
What is the difference between a dynamic IP address and a static IP address?
How do I configure a static IP address on my Genius P400?
Note: If your device isn’t connected to the network, go to How do I set up my Genius P400?

If you previously configured a static IP address but you now want to configure a dynamic IP address, follow the steps for your connection type:

Ethernet

  1. Use the keypad to press 1, 5, and 9 at the same time.
  2. Tap Com Control.
  3. Tap LAN.
  4. Tap Configuration, and then use the keypad to enter the password. The default password is 200331.
  5. Tap OK.
  6. Tap IPv4.
  7. Tap DHCP, and then tap Yes.

Apply your settings and return to the home screen

  1. Tap Back arrow.
  2. Tap Save, and then tap OK.
  3. Tap Yes, and then tap OK.
  4. Tap Back arrow.
  5. Tap Exit, and then tap Yes.
  6. Tap Genius.

Wi-Fi

  1. Use the keypad to press 1, 5, and 9 at the same time.
  2. Tap Com Control.
  3. Tap WiFi.
  4. Tap Configuration, and then use the keypad to enter the password. The default password is 200331.
  5. Tap OK.
  6. From the list of networks, select the network you want to configure, and then tap View/Edit.
  7. Tap IP settings, and then tap IPv4.
  8. Tap DHCP, and then tap Yes.

Apply your settings and return to the home screen

  1. Tap Back arrow  twice.
  2. Tap Save, and then tap OK.
  3. Tap Yes, and then tap OK.
  4. Tap Back arrow twice.
  5. Tap Exit, and then tap Yes.
  6. Tap Genius.

Bluetooth

  1. Use the keypad to press 1, 5, and 9 at the same time.
  2. Tap Com Control.
  3. Tap More.
  4. Tap Configuration, and then use the keypad to enter the password. The default password is 200331.
  5. Tap OK.
  6. Tap Network Interface.
  7. Tap BT_LAN.
  8. Tap IPv4.
  9. Tap DHCP, and then tap Yes.

Apply your settings and return to the home screen

  1. Tap Back arrow.
  2. Tap Save, and then tap OK.
  3. Tap Yes, and then tap OK.
  4. Tap Back arrow three times.
  5. Tap Exit, and then tap Yes.
  6. Tap Genius.

USB

  1. Use the keypad to press 1, 5, and 9 at the same time.
  2. Tap Com Control.
  3. Tap LAN.
  4. Tap Configuration, and then use the keypad to enter the password. The default password is 200331.
  5. Tap OK.
  6. Tap IPv4.
  7. Tap DHCP, and then tap Yes.
  8. Tap Back Button
  9. Tap Save.
  10. Tap OK.
  11. Tap Yes.

Apply your settings and return to the home screen

  1. Tap Back arrow.
  2. Tap Save, and then tap OK.
  3. Tap Yes, and then tap OK.
  4. Tap Back arrow twice.
  5. Tap Exit, and then tap Yes.
  6. Tap the Genius icon.

Was this post helpful?

Tags: , , , ,