How do I configure my iCT220/250’s network settings?

To configure your iCT220/250’s network settings, complete the following steps:

1. To return to the home screen, press Clear (red button).
2. Press .;#* (punctuation key).
3. Type the admin password, then press Enter (green button). The default password is 1234567F.
4. Press 3 (Setup menu), then press 2 (Communication).
5. Press 3 (Ethernet), followed by 2 (TerminalSetup), then press 2 (Static IP).
6. Configure the terminal’s static IP information:
   
   Option 1. To enter the terminal’s IP address:
   • Press 1 (TerminalIP).
   • Using the keypad, type the IP address.
   • Press Enter (green button).
   
   Option 2. To enter the terminal’s gateway IP address:
   • Press 2 (GatewayIP).
   • Using the keypad, type the gateway IP address.
   • Press Enter (green button).
   
   Option 3. To enter the terminal’s IP subnet mask:
   • Press 3 (IPSubMask).
   • Using the keypad, type the subnet mask.
   • Press Enter (green button).
   
   Option 4. To enter the terminal’s primary DNS IP address:
   • Press 4 (PriDNSIP).
   • Using the keypad, type the primary DNS IP address.
   • Press Enter (green button).
   
   Option 5. To enter the terminal’s secondary DNS IP address:
   • Press 5 (SecDNSIP).
   • Using the keypad, type the secondary DNS IP address.
   • Press Enter (green button).


7. Press Clear (red button). The terminal reboots.

Tags: configure network settings, static ip address, network connection, test connection, ict220, ict250, ingenico