Suggested search terms: geniusvx520ictbank accountfees

How do I enable or disable the keybeep or backlight on my iCT220/250?

You can set your iCT220/250’s keybeep to the following:

  • Always on
  • Always off
  • On when the terminal receives an invalid entry

You can also set the terminal’s backlight to the following:

  • Always off
  • Always on
  • On when keys are pressed

To enable or disable the keybeep or backlight, complete the following steps:

  1. To return to the home screen, press Clear (red button).
  2. Press .;#* (punctuation key).
  3. Type the admin password, then press Enter (green button). The default password is 1234567F.
  4. Press (Setup Menu), followed by (TermSettings), then press (TermHW).
  5. To edit the keybeep settings, press (KeyBeep), then complete one of the following steps:
    • To turn keybeep off, press (AllOff).
    • To turn keybeep on, press (AllOn).
    • To turn keybeep on for invalid entry only, press (InvalidOnly).
  6. To edit the backlight settings, press (Backlight), then complete one of the following steps:
    • To turn backlight off, press (AlwaysOff).
    • To turn backlight on, press (AlwaysOn).
    • To turn backlight on when keys are pressed only, press (On/KeyPress).

Was this post helpful?

Tags: , , , , , , ,