You can configure your iCT220/250 terminal to use Private Automated Branch Exchange (PABX), allowing it to use multiple call lines with a single access number.
To enable a PABX on your iCT220/250 terminal, complete the following steps:
Step 1. To return to the home screen, press Clear (red button).
Step 2. Press .;#* (punctuation key).
Step 3. Type the admin password, then press Enter (green button). The default password is 1234567F.
Step 4. Press 3 (Setup Menu), then press 2 (Communication).
Step 5. Press 2 (Dial), then press 1 (TerminalSetup), and then press 1 (AccessCode).
Step 6. Using the keypad, type the PABX access code, then press Enter (green button).
Let us know if this answered your question. If not, please let us know why!
Tags: multiple call lines, private automated branch exchange, single access number, ict220, ict250, ingenico, turn on pabx