Search
Generic filters

Suggested search terms: geniusvx520ictbank accountfees

How do I configure my iCT220/250 terminal’s network settings?

To configure your terminal’s network settings, complete the following steps:

Step 1. To return to the home screen, press Clear (red button).

Step 2. Press .;#* (punctuation key).

Step 3. Type the admin password, then press Enter (green button). The default password is 1234567F.

Step 4. Press (Setup menu), then press (Communication).

Step 5. Press 3 (Ethernet), followed by (TerminalSetup), then press 2 (Static IP).

Step 6. Configure the terminal’s static IP information:

Option 1. To enter the terminal’s IP address:

a. Press (TerminalIP).

b. Using the keypad, type the IP address.

c. Press Enter (green button).

Option 2. To enter the terminal’s gateway IP address:

a. Press (GatewayIP).

b. Using the keypad, type the gateway IP address.

c. Press Enter (green button).

Option 3. To enter the terminal’s IP subnet mask:

a. Press (IPSubMask).

b. Using the keypad, type the subnet mask.

c. Press Enter (green button).

Option 4. To enter the terminal’s primary DNS IP address:

a. Press (PriDNSIP).

b. Using the keypad, type the primary DNS IP address.

c. Press Enter (green button).

Option 5. To enter the terminal’s secondary DNS IP address:

a. Press (SecDNSIP).

b. Using the keypad, type the secondary DNS IP address.

c. Press Enter (green button).

Step 7. Press Clear (red button). The terminal reboots.

Was this post helpful?

Tags: , , , , , ,